These Z-Wave accessories find human presence in the area by detecting changes in infra-red radiation levels. If a person moves within or across the devices field of vision, a trigger radio signal will be transmitted to the hub and cause full alarm condition in order to frighten intruders away. A motion detector can also be used to activate smart plugs or in-wall modules by motion detection.
Except the floodlight that require cable connection all the others motion detectors are easy to install: just insert the batteries and place the detector where you need.
Choose between 4 different models depending of your needs: normal motion detector, pet immune detector, outdoor motion detector or motion detector with floodlight.
Any attempt to remove the motion sensor will trigger an instant alert on the security system.
You can change the detection angle to make it wider but with shorter range or narrow but with longer range.
Since the motion is detected by infra-red, it is going to work even in very dark environments.
All Z-Wave devices are wireless, you only need to add batteries and press one button to pair to the hub.
Protect your house from intruders
and let you pet free to move.
Any attempt to remove the motion sensor will trigger an instant alert on the security system.
The sensor can detect motion up to 12m with a 110º angle.
You don't need to leave your pet outside at cold, this sensor will detect only human intruders. Pet size should be less than 90cm long, 60cm tall.
All Z-Wave devices are wireless, you only need to add batteries and press one button to pair to the hub.
Motion detectors for outdoor use
Detect motion near your house
100º wide angle and 10m max detection distance
The head can be moved vertically up to 180º. That allows you to point the sensor everywhere from wall or ceiling installation.
This sensor can be installed outdoor in a place repaired from rain. Keep it far from any metal surface or object which may highly reduce the wireless range.
The 20w LED can provide 5000K white light with 1500 lm to brighten your front door or walkway. LED lights have longer lifetime and lower power consumption, motion activation can help even more saving energy.
EH403 features a PIR detector to detect motion through movement of heat sources and a lux sensor for determining brightness of its surroundings. You can set the light to turn on only with a certain level of darkness.
You can select the time light will stay ON after each motion detection (5sec ~ 12min).
The accessory can work as part of Z-Wave system or as an indipendent device: light will be activate by motion and darkness.
Create a scene to turn on lights when the motion sensor detects motion. Usually it is also possible to choose the time lights will stay on.
Create a scene to automatically turn on the television when you seat. The motion sensor should be installed nearby.
Heating may be not necessary if nobody is moving around. You can create a scene to activate the radiator valve only after motion detetction.
Cut down the development time with drag-and-drop website builder. Drop the blocks into the page, edit content inline and publish - no technical skills required.
Cut down the development time with drag-and-drop website builder. Drop the blocks into the page, edit content inline and publish - no technical skills required.
Choose from the large selection pre-made blocks - full-screen intro, bootstrap carousel, slider, responsive image gallery with, parallax scrolling, sticky header and more.
Choose from the large selection pre-made blocks - full-screen intro, bootstrap carousel, slider, responsive image gallery with, parallax scrolling, sticky header and more.